WLA-A Series

Active monitors

WLA-12MA

  • 750 W continuous
  • 12″ Active monitor
  • 35 mm pole socket
  • Internal DSP with FIR presets
  • Network connection using RS485 protocol
  • 131 dB Max SPL @ 1 m

WLA-15MA

  • 750 Watts continuous
  • 15″ Active monitor
  • 35 mm pole socket
  • Internal DSP with FIR presets
  • Network connection using RS485 protocol
  • 134 dB Max SPL @ 1 m

Active Line Array System

The quality and durability of the well established WLA series is now available in an active series.

The series consists of 5 new models which are enhanced with internal DSP using FIR presets. Ethernet control also delivers remote system management tools through a single cable.

The line-up consists of a 2 x 8” array element, two active floor monitors, a dual 15” flown subwoofer and the 2000 W continuous WLA-218BA dual 18” subwoofer. A combination of products which allows for comprehensive systems to be designed, installed and toured.

The system is also compatible with the WLA-28 Common Fly Frame and WLA-28 Dolly Frame and can also be protected using the readily available WLA Series tourbags.

WLA-12MA

750 watts
Continuous
  • 12″ Active floor monitor
  • 131 dB Max SPL @ 1 meter
  • 15 mm Birch plywood construction
  • 90° x 60° dispersion
  • 650 W LF + 100 W HF Continuous
  • 1300 W LF + 200 W HF Peak
  • 8 x DSP presets including FIR

WLA-15MA

750 watts
Continuous
  • 15″ Active floor monitor
  • 134 dB Max SPL @ 1 meter
  • 15 mm Birch plywood construction
  • 90° x 60° dispersion
  • 650 W LF + 100 W HF Continuous
  • 1300 W LF + 200 W HF Peak
  • 8 x DSP presets including FIR

Internal DSP with FIR

8 x DSP Presets – built in – including FIR.  

Easy to get great results – fast.

Software control

The network connection uses RS485 protocol and gives GUI control over the DSP parameters of each element in the array.

Versatile configuration

The WLA-A Series active monitors feature….

35 mm pole sockets PLUS 8 x M10 rigging points.  This means that they can be used in a wide variety of applications.  From install to onstage.  From FOH to monitor.

THINK BIG

Imagine your dream active system!  You can configure a WLA-A series rig to suit your needs!  Click to zoom in.

The WLA-A Active series can create a system of any size.  Looking for arrays and subwoofers….?  Click the link….

WLA-12MA / WLA-15MA

SPECIFICATIONS

Model NameWLA-12MAWLA-15MA
System TypeActive 12” 2-way Monitor Bi-AmplifiedActive 15” 2-way Monitor Bi-Amplified
Frequency Response (+/-3 dB)55 Hz-20 KHz45 Hz-20 KHz
Frequency Range (-10 dB)50 Hz-20 KHz40 hz-20 KHz
Loudspeaker Sensitivity @ 1 W / 1 m)98 dB99.5 dB
Maximum SPL(peak)(@1 m)131 dB134 dB
Nominal Coverage (H x V)90° x 60°90° x 60°
Signal ProcessingDSP based,8 FIR presets resident in Input ModuleDSP based,8 FIR presets resident in Input Module
Preset listA) WEDGE
B) WEDGE HPF
C) COUPLED
D) COUPLED HPF
E) FOH
F) FOH HPF
G) CUSTOM
H) CUSTOM
A) WEDGE
B) WEDGE HPF
C) COUPLED
D) COUPLED HPF
E) FOH
F) FOH HPF
G) CUSTOM
H) CUSTOM
Amplifiers
Amplifier Design Class D Class D
Power Rating:1500 W Peak (1300 W LF +
200 W HF), 750 W Continuous
(650 W LF + 100 W HF)
1500 W Peak (1300 W LF +
200 W HF), 750 W Continuous
(650 W LF + 100 W HF)
Power On ProtectionPower switch on/off mutePower switch on/off mute
Thermal ProtectionAmplifier Shut Down. Auto ResetAmplifier Shut Down. Auto Reset
Low Line Voltage Shut Down80% Nominal Line Voltage80% Nominal Line Voltage
Driver ProtectionIndependent L/ H Limiters and DCIndependent L/ H Limiters and DC
DC and Short ProtectionYesYes
Limiter IndicatorRed LEDRed LED
Signal IndicatorGreen LEDGreen LED
Power/Active IndicatorWhite LEDWhite LED
Find Function IndicatorBlue LEDBlue LED
Input Sensitivity+4 dBu+4 dBu
Maximum Input Level+18 dBu+18 dBu
Input ImpedanceBalanced: 10 KΩBalanced: 10 KΩ
AC Power details – Power SupplyHigh Efficiency Switching Mode Power SupplyHigh Efficiency Switching Mode Power Supply
Connectors
Input ConnectorXLR 1/ 4〞Combo jackXLR 1/ 4〞Combo jack
Link ConnectorBalanced Male XLR ConnectorBalanced Male XLR Connector
UPDATEUSB Type BUSB Type B
NETWORK (RS485)RJ45RJ45
AC Power OptionsAC 100-120 V~/ 220-240 V~,50/60 HZAC 100-120 V~/ 220-240 V~,50/60 HZ
AC Input ConnectorpowerCONpowerCON
AC Loop Through ConnectorpowerCONpowerCON
Hardware – RiggingM10 x 8M10 x 8
Enclosure Material and finish15 mm Plywood15 mm Plywood
Colour OptionsBlack Rhino PaintBlack Rhino Paint
Grille Material & Finish1.5 Steel1.5 Steel
Unpacked dimensions – Height658 mm / 25.9″723 mm / 28.5″
Width (Front)372 mm / 14.6″432 mm / 17″
Width (Back)
Depth400.1 mm / 15.8″433.8 mm / 17.1″
Packed Dimensions – Height738 mm / 29.1″808 mm / 31.8″
Width (Front)470 mm / 18.5″504 mm / 19.84″
Width (Back)470 mm / 18.5″504 mm / 19.84″
Depth445 mm / 17.5″504 mm / 19.84″
Net Weight (Kg / lbs)26.5 Kg / 58.3 lbs29.6 Kg / 65.1 lbs
Gross Weight (Kg / lbs)28.8 Kg / 63.4 lbs32.3 Kg / 30.1 lbs