Please note – WLA-210 is only available in selected regions of the world. Please check availability with your local Wharfedale Pro distributor
WLA-210
Dual 10" practicality !!
WLA-210
- 2 x 10″ LF drivers
- 3″ Neodymium HF compression driver
- 130 dB Max SPL
- Birch plywood construction
- Integral, side plate adjustable rigging system
WLA-210SUB
- 15″ Subwoofer
- 133 dB Max SPL @ 1m
- 18mm Birch plywood construction
- Integral, side plate adjustable rigging system
- 4 carry handles
WLA-210
- 2 x 10″ LF drivers
- 3″ Neodymium HF compression driver
- 130 dB Max SPL
- Birch plywood construction
- Integral, side plate adjustable rigging system
- 90° x 10° dispersion
- 160 W programme HF
- 1600 W programme LF
- 16 Ω impedance
WLA-210SUB
- 15″ Subwoofer
- 133 dB Max SPL @ 1m
- 18 mm Birch plywood construction
- Integral, side plate adjustable rigging system
- 4 carry handles
- 4800 W peak
- 2400 W programme
- 1200 W continuous
- 8 Ω impedance
Dual 10"
The two 10″ low frequency drivers are designed and made exclusively in house by Wharfedale Pro.
With large, 3″ voice coils the power handling is impressive.
These LF drivers use advanced neodymium magnets for maximum efficiency and overall power handling but with the advantage of being light in weight.
The LF drivers each handle 400 W Continuous resulting in a total LF power of 800 W Continuous.
Those highs
The centrally mounted HF compression driver is also a Wharfedale Pro custom made component.
Using a neodymium magnet, the compression driver is efficient and also light weight. The 3″ voice coil allows for high power handling and improved cooling.
The HF compression driver and a plane wave converter is combined with a 90° x 10° (H*V) exponential horn to produce a consistent wavefront.
The 111 dB sensitivity of HF driver enables the WLA-210 to produce a peak sound pressure output up to 130 dB @1 meter.
Optional FLY FRAME
Arrays can be assembled using only WLA-210 line array elements or with WLA-210SUB Subwoofers at the top of the array.
The WLA-210 Common Fly frame supports up to 10 x WLA-210 elements and 1 x WLA-210SUB OR 12 x WLA-210 with a safety factor of 12.
AMPS & DSP
A Versadrive DSP (such as SC-48 FIR) or a DP-N series amplifier with internal FIR filtering is highly recommended to get the most from the system. Phase, EQ and filtering should be applied and this way, the physics of the system can be truly optimised – delivering that sub-bass, power and clarity that this system can deliver.
3-way Versadrive presets
To help you setup a WLA-210 system quickly and accurately, there is a preset template file for the SC-36 Versadrive Matrix Controller.
This can be freely downloaded and can be installed into the Wharfedale Pro SC-36.
WLA-210
WLA-210SUB
SPECIFICATIONS
| Model Name | WLA-210 | WLA-210SUB |
|---|---|---|
| System type | Passive | Passive subwoofer |
| Configuration | 3-way (2 x 10″ + HF compression driver) | 15″ single sub |
| Frequency response (+3 dB) | 70-16 KHz | 38-200 Hz |
| Frequency range (-10 dB) | 60-18 KHz | 25-320 Hz |
| Sensitivity 2.83 v / 1 m | HF:111 dB / LF:100 dB | 102 dB |
| Calculated Max SPL @1 m | HF:130 dB / LF:129 dB | |
| System rated impedance | 16Ω | 8Ω |
| LF Transducer | ||
| Size (mm / inches) | 260mm / 10″ | 390mm / 15″ |
| Voice coil size (mm / inches) | 75.5mm / 3″ | 75.5mm / 3″ |
| LF Magnet material | NdFeB | Ferrite |
| LF Frame material | Aluminium | Aluminium |
| Rated impedance | 8Ω | 8Ω |
| LF Power re:AES2-2012 | 400 W | 600 W |
| HF Transducer | ||
| HF Driver type | Compression driver | _ |
| Coil size (mm / inches) | 75mm / 3″ | _ |
| Exit size (mm / inches) | 1.4″ | _ |
| HF Magnet material | NdFeB | _ |
| Diaphragm material | Titanium | _ |
| Rated impedance | 16Ω | _ |
| HF Power re:AES2-2012 | 80 W | _ |
| Waveguide type | Square | _ |
| Nominal coverage (H x V) | 90° x 10° | _ |
| Nominal impedance | 16Ω | _ |
| Power | ||
| System continuous power | HF:80 W / LF:800 W | 1200 W |
| System programme power | HF:160 W / LF:1600 W | 2400 W |
| System peak power | HF:320 W / LF:3200 W | 4800 W |
| Crossover frequency | 1.2KHz | |
| Hardware | ||
| Input connections | 2 x speakON compatible | 2 x speakON compatible |
| Rigging | 3 points | 3 points |
| Pole mount | No | No |
| Handles | 2 | 4 |
| Cabinet | ||
| Cabinet type | Trapezoid | Square |
| Enclosure material and finish | 15mm / 18mm birch plywood | 18mm Birch plywood |
| Colour options | Black paint | Black paint |
| Grille material | Steel | Steel |
| Dimensions Unpacked | ||
| Height | 303mm | 605mm |
| Width front | 730mm | 730mm |
| Width rear | 700mm | 700mm |
| Depth | 509mm | 700mm |
| Dimensions Packed | ||
| Height | 780mm | 685mm |
| Width front | 380mm | 775mm |
| Width rear | 380mm | 755mm |
| Depth | 570mm | 755mm |
| Weight | ||
| Net weight | 32kg | 65kg |
| Gross weight | 35kg | 69kg |
Downloads
WLA-210 Media library
(External link to OneDrive library)
