Key Features

  • Premium components for premium sound
  • 3.0" voice coils (K6012 and K6015)
  • 70° x 70° rounded waveguides
  • 15mm Birch plywood construction
  • 19 x M8 rigging points 
  • Top and side M8 points with 100mm width
  • Integral 35mm pole sockets
  • Rotatable front grille logo
  • Custom polyethylene HF diaphragm
  • 1.75" HF compression driver voice coils

Download the K Series announcement PDF Here

Download the K Series Data Sheets PDF Here

10", 12" and 15"
To cover all occasions and installations, K series is available as a compact 10" (K6010), a practical 12" (K6012) and the most powerful 15" (K6015).

A lineup which makes small, mid or large scale fixed entertainment space installations understandable and straightforward.

The LF transducers are a low distortion design using ferrite magnets with a built-in aluminium ring for optimum heat dissipation. The HF compression drivers have a 1.75” voice coil and use a polyethylene (pe) diaphragm for maximum vocal intelligibility in enclosed spaces. This HF compression driver is coupled to a 70° x 70° waveguide for smooth dispersion regardless of horizontal or vertical placement.

The cabinet of K6000 series is made of high quality 15mm multi-layer birch plywood. This plywood is covered with a black, wear-resistant paint treatment. The cabinet is trapezoidal and is equipped with two Neutrik speakON nl4mp connectors.

With 19 x M8 threaded suspension points and a further 6 x M8 points in a 100mm configuration, installation at any angle is simple and easy. The hexagonal hole steel front grille and inner foam lining protects the drive units from dust or insects.

In addition, the iconic Wharfedale Pro logo on the front grille is rotatable to ensure that K6000 looks great in any orientation.

K6000 - the new premium entertainment loudspeaker from Wharfedale Pro. Take a listen!
Precisely engineered HF compression driver
The HF compression driver is specifically made to give vocals a sense of space and air.

The polyethylene diaphragm material delivers a crispness to high frequencies - without becoming 'harsh'.

In addition, the large 1.75" HF voice coil ensures consistent HF power delivery with efficient cooling.

All K series models feature the 70° x 70° rounded waveguide which delivers smooth dispersion whether the K series is mounted either horizontally or vertically.

Rear ports
Carefully tuned rear ports allow a K series loudspeaker to deliver smooth mid-low frequencies that can usually only be heard from loudspeakers with a larger cabinet size.

When positioned either near a wall or in a corner of a room, these ports help to enhance the lower frequencies, even at low volume.
Model NameK6010K6012K6015
System TypePassivePassivePassive
Frequency Response (+/-3dB)65-20kHz60Hz-20kHz45Hz-20kHz
Sensitivity 2.83v/1m96dB97dB98dB
Calculated Maximum SPL @1m127dB129dB131dB
System Rated Impedance
Low Frequency Transducer   
Size (mm / inches)288mm / 10''305mm / 12''381mm / 15''
Voice Coil Size (mm / inches)63.5mm / 2.5''75mm / 3.0''75mm / 3.0''
LF Magnet MaterialFerriteFerriteFerrite
LF Frame MaterialAluminiumAluminiumAluminium
Rated Impedance
High Frequency Transducer   
HF Driver Type:Compression DriverCompression DriverCompression Driver
Voice Coil Size (mm / inches)44mm / 1.75''44mm / 1.75''44mm / 1.75''
Diaphragm MaterialPolyethylenePolyethylenePolyethylene
Nominal Coverage (H x V)70° x 70°70° x 70°70° x 70°
System Continuous Power300w400w500w
System Programme Power600w800w1000w
System Peak Power1200w1600w2000w
Crossover frequency2.9kHz3.75kHz3.2kHz
Input Connector2 x Neutrik NL4MP2 x Neutrik NL4MP2 x Neutrik NL4MP
RiggingM8 * 19M8 * 19M8 * 19
Pole mount35mm pole socket35mm pole socket35mm pole socket
Cabinet typeTrapezoidTrapezoidTrapezoid
Enclosure Material and finish15mm plywood15mm plywood15mm plywood
Colour OptionsBlack paintBlack paintBlack paint
Grille Material & FinishSteelSteelSteel
Dimensions - Unpacked   
Width Front310mm350mm430mm
Width Rear210mm 242mm298mm
Net Weight18.9kg24.3kg29.3kg