K6000 Series Something to sing about
- Premium components for premium sound
- 3.0″ voice coils (K6012 and K6015)
- 70° x 70° rounded waveguides
- 15 mm Birch plywood construction
- 19 x M8 rigging points
- Top and side M8 points with 100 mm width
- Integral 35 mm pole sockets
- Rotatable front grille logo
- Custom polyethylene HF diaphragm
- 1.75″ HF compression driver voice coils
K6000 is a series of 3 premium, high output and superior performance full range speakers, specifically engineered for fixed entertainment space installations.
The LF transducers are a low distortion design using ferrite magnets with a built-in aluminium ring for optimum heat dissipation. The HF compression drivers have a 1.75” voice coil and use a polyethylene (pe) diaphragm for maximum vocal intelligibility in enclosed spaces. This HF compression driver is coupled to a 70° x 70° waveguide for smooth dispersion regardless of horizontal or vertical placement.
The cabinet of K6000 series is made of high quality 15mm multi-layer birch plywood. This plywood is covered with a black, wear-resistant paint treatment. The cabinet is trapezoidal and is equipped with two Neutrik speakON nl4mp connectors.
With 13 x M8 threaded suspension points and a further 6 x M8 points in a 100mm configuration, installation at any angle is simple and easy.
The hexagonal hole steel front grille and inner foam lining protects the drive units from dust or insects. In addition, the iconic Wharfedale Pro logo on the front grille is rotatable to ensure that K6000 looks great in any orientation.
K6000 – the premium entertainment loudspeaker from Wharfedale Pro.
Take a listen!
- 10″ 2-way passive
- 2.5″ LF voice coil
- 300 watts AES (RMS)
- 600 watts Programme
- 1200 watts Peak
- 127 dB Max SPL @ 1 meter
- 12″ 2-way passive
- 3.0″ LF voice coil
- 400 watts AES (RMS)
- 800 watts Programme
- 1600 watts Peak
- 129 dB Max SPL @ 1 meter
- 15″ 2-way passive
- 3.0″ LF voice coil
- 500 watts AES (RMS)
- 1000 watts Programme
- 2000 watts Peak
- 131 dB Max SPL @ 1 meter
All K6000 series models use premium Baltic birch plywood construction.
Not only does this create a solid and durable cabinet, but it also contributes to the overall sound and character.
K6000 Series models are also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a K6000 will always look as good as the day you unboxed it.
SOlid as a rock
As with all Wharfedale Pro PA systems, years of expertise is behind a loudspeaker built to last, with thanks to our high standards of quality control.
The K6000 series are coated in the highest quality Rhino Rock paint finish – a chip resistant texture with a professional, discrete aesthetic whilst being prepared for the rigours of life on the road.
HF compression driver
The HF compression drivers for the K6000 series have a 1.75” voice coil and use a polyethylene (pe) diaphragm for maximum vocal intelligibility in enclosed spaces.
This HF compression driver is coupled to a 70° x 70° waveguide for smooth dispersion regardless of horizontal or vertical placement.
LF voice coils
A critical element is the size of the voice coil and K6000 series loudspeakers boast some of the largest voice coils in their category.
K6010 has a 2.5″ voice coil while the rest of the lineup (K6012 and K6015) feature 3″ voice coils.
These larger than usual voice coils allow for the K6000 series to handle high power situations easily.
Carefully tuned rear ports allow the K6000 series to deliver smooth mid-low frequencies that can usually only be heard from loudspeakers with a larger cabinet size.
When positioned either near a wall or in a corner of a room, these ports help to enhance the lower frequencies, even at low volume.
|Frequency Response (+/-3 dB)||65-20 kHz||60 Hz-20 kHz||45 Hz-20 kHz|
|Sensitivity 2.83 v/1 meter||96 dB||97 dB||98 dB|
|Calculated Maximum SPL @ 1 m||127 dB||129 dB||131 dB|
|System Rated Impedance||8 Ω||8 Ω||8 Ω|
|Low Frequency Transducer|
|Size (mm / inches)||288 mm / 10”||305 mm / 12”||381 mm / 15”|
|Voice Coil Size (mm / inches)||63.5 mm / 2.5”||75 mm / 3.0”||75 mm / 3.0”|
|LF Magnet Material||Ferrite||Ferrite||Ferrite|
|LF Frame Material||Aluminium||Aluminium||Aluminium|
|Rated Impedance||8 Ω||8 Ω||8 Ω|
|High Frequency Transducer|
|HF Driver Type:||Compression Driver||Compression Driver||Compression Driver|
|Voice Coil Size (mm / inches)||44mm / 1.75”||44mm / 1.75”||44mm / 1.75”|
|Nominal Coverage (H x V)||70° x 70°||70° x 70°||70° x 70°|
|System Continuous Power||300 w||400 w||500 w|
|System Programme Power||600 w||800 w||1000 w|
|System Peak Power||1200 w||1600 w||2000 w|
|Crossover frequency||2.9 kHz||3.75 kHz||3.2 kHz|
|Input Connector||2 x Neutrik NL4MP||2 x Neutrik NL4MP||2 x Neutrik NL4MP|
|Rigging||M8 * 19||M8 * 19||M8 * 19|
|Pole mount||35 mm pole socket||35 mm pole socket||35 mm pole socket|
|Enclosure Material and finish||15 mm plywood||15 mm plywood||15 mm plywood|
|Colour Options||Black paint||Black paint||Black paint|
|Grille Material & Finish||Steel||Steel||Steel|
|Dimensions – Unpacked|
|Height||533 mm||600 mm||680 mm|
|Width Front||310 mm||350 mm||430 mm|
|Width Rear||210 mm||242 mm||298 mm|
|Depth||335 mm||382 mm||450 mm|
|Net Weight||18.9 kg||24.3 kg||29.3 kg|