- Flexible point-source passive array series
- Suitable for many different venues and formations
- 100° x 10° long-throw waveguide (Focus 12 & 15)
- Huge power handling and massive voice coils
- Huge SPL capabilities up to 146dB SPL peak on subs
- Bi-amp and Passive mode switching
- Dual angle pole mount sockets
- M10 x 11 & Fly Track Rigging points
- speakON compatible inputs
- Fly individually, in pairs or configure in array formations
FOCUS 218Sdiscontinued

- Dual 18″ passive subwoofer
- 4.5″ voice coils
- M20 pole socket plus 4 side handles
- 146 dB Max SPL @ 1 meter
- 2000 w AES (RMS)
- 4000 w Program
- 8000 w Peak
- Parallel (4Ω) and Discrete (8Ω) modes
RECOMMENDED AMPLIFIERS

Optimized acoustic engineering
Focus tops and subs are superbly engineered to work together seamlessly and provide maximum efficiency.
The two-way Focus 12 and Focus 15 models employ High-Q 100° x 10° long-throw waveguide horn geometry to project the sound to the back of large listening areas. All this comes together to create a point-source array system!
Passive & Bi-amp mode
Focus 12 and Focus 15 full range models feature Passive and Bi-Amp mode switching.
In PASSIVE mode, a single amplifier can be used to power all drivers inside the Focus. The full frequency range is put into the loudspeaker and the Focus’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. This means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.
In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier.
This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.

Super PLY
All Focus models use premium Baltic birch plywood construction.
Not only does this create a solid and durable cabinet, but it also contributes to the overall sound and character.
Focus series are also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a Focus loudspeaker will always look as good as the day you unboxed it.
Super fly
Focus series hardware allows you to fly in a line-array configuration, fly independently and in pairs or stack PA’s on top of subs.
Focus adapts perfectly to whatever challenges your venue presents you with!


SOnic Impact
At peak output levels a single Focus 15 can pump out 135 dB SPL and maximum power handling is rated at 2800 watts peak. Focus subs put out an equally impressive 146 dB Max SPL of pounding bass with a maximum power handing capacity of 8000 watts peak.
Need more? Just double up! The Focus V-Tech side-by-side driver placement maximizes mutual coupling and boundary-effect reinforcement to move massive amounts of air and push the beat to the soul of your audience.
About the monitor
For applications where space is at a premium, Focus 12M is a small footprint, high power versatile monitor.
Housed inside a 15mm birch plywood cabinet, Focus 12M delivers the high power output to impress and encourage any performer.
The finest drivers have been selected. With an LF driver that boasts a 3.0” voice coil and a custom made Wharfedale Pro HF compression driver with a 2.0” voice coil, the transducers of Focus 12M are ready for the extreme volumes demanded by installers, rental companies and tours.
But Focus 12M has also been designed to be versatile. A 35mm pole socket in its base allows setups to be configured in a variety of ways. Focus 12M can be a floor monitor or a side fill depending on the requirements.
Durable rubber feet also contribute to the overall quality, keeping the monitor physically, and sonically, stable.
SPECIFICATIONS
Model Name | Focus-12 | Focus-15 | Focus-12M | Focus-18S | Focus-218S – discontinued |
---|---|---|---|---|---|
System Type | Passive | Passive | Passive | Passive | Passive |
Configuration | Two-way | Two-way | Two-way floor monitor | Subwoofer | Dual Subwoofer |
Frequency Response (+/-3 dB) | 60 Hz – 20 KHz | 50 Hz – 20 KHz | 60 Hz – 20 KHz | 35 Hz – 800 Hz | 30 Hz – 800 Hz |
Frequency Range (-10 dB) | 55 Hz – 20 KHz | 45 Hz – 20 KHz | 65 Hz – 20 KHz | 30 Hz – 800 Hz | 25 Hz – 800 Hz |
Sensitivity (2.83 v / 1 m) | 99.5 dB | 99.5 dB | 99 dB | 104 dB | 107 dB |
Calculated Maximum SPL @1 m | 133 dB | 135 dB | 132 dB | 140 dB | 146 dB |
System Rated Impedance | 8 Ω | 8 Ω | 8 Ω | 8 Ω | Parallel 4 Ω / Discrete 2 x 8 Ω |
Low Frequency Transducer | |||||
Size | 305 mm / 12″ | 390 mm / 15″ | 305 mm / 12” | 462 mm / 18″ | 462 mm / 18″ |
Voice Coil Size | 76.2 mm / 3″ | 102 mm / 4″ | 75 mm / 3.0” | 114.3 mm / 4.5″ | 114.3 mm / 4.5″ |
Rated Impedance | 8 Ω | 8 Ω | 8 Ω | 8 Ω | 2 x 8 Ω |
LF Power (re:AES2-2012) | 500 w | 700 w | 500 w | 1000 w | 2 x 1000 w |
High Frequency Transducer | |||||
HF Driver Type | Compression Driver | Compression Driver | Compression driver | ||
Voice Coil Size | 81 mm / 3.2″ | 81 mm / 3.2″ | 50.8 mm / 2” | ||
Exit Size | 35.5 mm / 1.3″ | 35.5 mm / 1.3″ | 35.6 mm / 1.4” | ||
Diaphragm Material | Titanium | Titanium | Titanium | ||
Rated Impedance | 8 Ω | 8 Ω | 8 Ω | ||
HF Power (re:AES2-2012) | 75 w | 75 w | 50 w | ||
Nominal Coverage (H x V) | 100° x 10° | 100° x 10° | 90° x 40° | ||
Power | |||||
System Continuous Power | 500 w | 700 w | 500 w | 1000 w | Parallel 2000 w / Discrete 1000 w |
System Programme Power | 1000 w | 1400 w | 1000 w | 2000 w | Parallel 4000 w / Discrete 2000 w |
System Peak Power | 2000 w | 2800 w | 2000 w | 4000 w | Parallel 8000 w / Discrete 4000 w |
Crossover frequency | 1.6 KHz | 1.6 KHz | 2.0 KHz | ||
Input Connector | 2 x NL4 (speakON Compatible) | 2 x NL4 (speakON Compatible) | 2 x NL4 (speakON Compatible) | 2 x NL4 (speakON Compatible) | 2 x NL4 (speakON Compatible) |
Hardware | |||||
Pole Mount | Dual-angle 35 mm Pole Socket | Dual-angle 35 mm Pole Socket | 35 mm pole socket | M20 thread Pole Mount | M20 thread Pole Mount |
Handles | 2 On Sides | 2 On Sides | 1 on top | 4 On Sides | 4 On Sides |
Enclosure | |||||
Enclosure Material | 15 mm Plywood | 15 mm Plywood | 15 mm Plywood | 18 mm Plywood | 18 mm Plywood |
Finish | Black Rhino Paint | Black Rhino Paint | Black Rhino Paint | Black Rhino Paint | Black Rhino Paint |
Grille Material & Finish | 1.5 mm Steel | 1.5 mm Steel | 1.5 mm Steel | 1.5 mm Steel | 1.5 mm Steel |
Dimensions – (Unpacked) | |||||
Height | 625 mm / 24.6″ | 690 mm / 27.17″ | 570 mm / 22.4” | 540 mm / 21.26″ | 540 mm / 21.26” |
Width Front | 455 mm / 17.91″ | 455 mm / 17.91″ | 374.6 mm / 14.7” | 490 mm / 19.29″ | 880 mm / 34.65” |
Width Rear | 270 mm / 10.63″ | 224.5 mm / 8.84″ | 374.6 mm / 14.7” | 490 mm / 19.29″ | 880 mm / 34.65” |
Depth | 435 mm / 17.13″ | 433 mm / 17.05″ | 331.5 mm / 13.05” | 900 mm / 35.43″ | 900 mm / 35.43” |
Dimensions – (Packed) | |||||
Height | 695 mm / 27.36″ | 750 mm / 29.53″ | 665 mm / 26.2” | 615 mm / 24.21″ | 615 mm / 24.21” |
Width Front | 455 mm / 17.91″ | 500 mm / 19.69″ | 454 mm / 18.5” | 560 mm / 22.05″ | 960 mm / 37.80” |
Width Rear | 270 mm / 10.63″ | 285 mm / 7.28″ | 454 mm / 18.5” | 560 mm / 22.05″ | 960 mm / 37.80” |
Depth | 426 mm / 16.78″ | 480 mm / 18.9″ | 401 mm / 15.8” | 970 mm / 38.19″ | 970 mm / 38.19” |
Weight | |||||
Net Weight | 26.3 kg / 57.9 lbs | 34.1 kg / 75 lbs | 21.4 kg / 47.1 lbs | 52.4 kg / 115.3 lbs | 86.5 kg / 190.3 lbs |
Gross Weight | 28.2 kg / 62.04 lbs | 36.5 kg / 80.3 lbs | 23.8 kg / 52.4 lbs | 61.3 kg / 134.9 lbs | 98 kg / 215.6 lbs |
Downloads
Focus manual
Focus 12, Focus 15, Focus 18S, Focus 218S
Focus 12M Manual
Focus 12M
Focus series flyer
Focus 12, Focus 15, Focus 18S, Focus 218S
Focus Series Media library
(External link to OneDrive library)