DP-D SERIES Specifications that are hard to believe
Powerful Class D amplifiers with internal DSP, stable down to 2 ohms…..
- Huge output power – up to 14.2 kW at 4 Ω Bridged!
- 4 channels
- Stable down to 2 Ohms
- Internal DSP
- RS485 for AES3 digital inputs
- Class D topology
- External software control
- Internal EQ, Limiting, Delay, Phase and filtering
- Ideal for line array and multi-speaker systems
- Lightweight and only 1U. Perfect for touring or fixed installations.
DP-4150D
- 4 channels
- 8 Ohm 4 x 1500 Watts
- 4 Ohm 4 x 2550 Watts
- 2 Ohm 4 x 3570 Watts
- 16 Ohm Bridged 2 x 3000 Watts
- 8 Ohm Bridged 2 x 5100 Watts
- 4 Ohm Bridged 2 x 7140 Watts
DP-4100D
- 4 channels
- 8 Ohm 4 x 1000 Watts
- 4 Ohm 4 x 1700 Watts
- 2 Ohm 4 x 2890 Watts
- 16 Ohm Bridged 2 x 2000 Watts
- 8 Ohm Bridged 2 x 3400 Watts
- 4 Ohm Bridged 2 x 5780 Watts
Take control
Harnessing the power of the internal DSP
The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-D amplifier.
Operated from a single page, it is simple to monitor and edit the DP-D remotely.
DSP Parameters
The internal DSP is powerful
This high quality DSP delivers granular editing of EQ, Limiting, Delay, Phase and Filtering to the signal path, allowing a DP-D amp to become the system controller ……as well as the power amplifier.
STABLE DOWN TO 2 OHMS
Huge output power and stable down to 2 Ohms
The power output figures of DP-D series are staggering.The rated power outputs are measured at THD = 1%, continuous sinusoidal 1 KHz with each channel working simultaneously.
DP-D amps are also stable down to 2 Ohms. This allows for multiple 8 Ω or 16 Ω speakers to be driven with extreme power.
SPECIFICATIONS
| MODEL | DP-4150D | DP-4100D | |
|---|---|---|---|
| Rated power (THD = 1%, continuous sinusoidal 1 KHz. | 8 Ohm | 4 x 1500 w | 4 x 1000 w |
| Each channel working simultaneously) | 4 Ohm | 4 x 2550 w | 4 x 1700 w |
| 2 Ohm | 4 x 3570 w | 4 x 2890 w | |
| 16 Ohms Bridged | 2 x 3000 w | 2 x 2000 w | |
| 8 Ohms Bridged | 2 x 5100 w | 2 x 3400 w | |
| 4 Ohms Bridged | 2 x 7140 w | 2 x 5780 w | |
| RMS output voltage (THD=1%，1 KHz) | 109.5 V | 89.4 V | |
| Max input level | 8.7 Vrms (21 dBu) (default gain) | ||
| Default gain (rated output power, 1 KHz) | 25 dB | 23 dB | |
| Gain range (rated output power, 1 KHz) | 23 dB~41 dB | 21 dB~39 dB | |
| THD N (10% of rated output power, typical value) | 0.0005 | 0.0005 | |
| IMD-SMPTE (10% of rated output power, typical value) | 0.0005 | 0.0005 | |
| DIM30 (10% of rated output power, typical value) | 0.0005 | 0.0005 | |
| Crosstalk suppression (below rated power, 20 Hz-1 KHz) | ≥90 dB | ≥90 dB | |
| Frequency response (10% of rated output power, 8Ω, 20 Hz-20 KHz ) | ±0.2 dB | ±0.2 dB | |
| input resistance | 20 kΩ (balanced), 10 kΩ (unbalanced) | 20 kΩ (balanced), 10 kΩ (unbalanced) | |
| Damping coefficient (8Ω, 20 Hz-200 Hz) | ≥1000 | ≥1000 | |
| Signal to noise ratio (A weight, 20 Hz-20 KHz) | ≥105 dB (default gain) | ≥105 dB (default gain) | |
| Power requirements | 100∽240 VAC，50∽60 Hz | 100∽240 VAC，50∽60 Hz | |
| Protection | Power supply under voltage, | Power supply under voltage, | |
| power amplifier output DC, | power amplifier output DC, | ||
| overheating, | overheating, | ||
| temperature power control, | temperature power control, | ||
| overload power control | overload power control | ||
| Dimensions (WxHxD) | 483 x 44 x 465mm | 483 x 44 x 370mm | |
| Net weight | 13 kg | 9 kg |
Downloads
PC Editing software
Zip file for PC
DP-D Series Media library
(External link to OneDrive library)
