TITAN 15 ACTIVE

TITAN 15 ACTIVE

Our unique EWG™ design is the result of intensive computer modeling of natural acoustic wave propagation. To provide more acoustically transparent high-frequency pattern control, hard edges, corners, and parallel surfaces were eliminated from the design while still enabling 90 x 60 degree high frequency coverage. The smoother, more "organic" shape of the EWG™ design reduces high frequency distortion and diffraction eliminating acoustic artifacts found in other horn design technologies. The result is smoother frequency response, greater driver efficiency, and improved vocal and instrument reproduction.

Proprietary 90° x 60° Elliptical Wave Guide™ horn design
Power on indicator in horn throat and on rear panel

Titan™ 15 ACTIVE DESCRIPTIONS

Amplifier:

The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.

The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.

The speaker stand receptacle features a locking screw to ensure stability.

Ten M8 threaded rigging points are provided for a variety of safe flying

configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.

Mixer and Controls

The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.

SPECIFICATIONS
MODEL TITAN 15 ACTIVE
GENERAL INFO
System type Active 15" 2-way Bi-Amplified
Frequency response +/- 3db 50-20kHz
Max SPL (Calc) 125dB
HF SECTION
Hf type Titanium Compression Driver
Horn dispersion (H x V) 90° x 60°
Hf exit size mm / inches 25mm / 1"
PHYSICAL FEATURES
Enclosure Material Injection Moulded Polypropylene
Enclosure Colour Grey or White or Black
Size (mm/inches) 381mm / 15"
IN / OUT PANEL (speaker Level)
Input connector XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF and HF limiters
DC Protection Yes
Short Protection Yes
Controls High (±10dB) 10kHz Shelving
Dimensions (HxWxD)
mm 708.3mm x 477.8mm x 401.77mm
inches 27.9" x 18.8" x 15.8"
Microphone / Transmitter
Maximum Input Level +22dBu
Impedance 4 Ω
MIXER MODEL
INPUT IMPEDANCE Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter Turns on approx 350W output
Limiter Indicator Red LED
Power Indicator Red LED
AC Power details
Power Supply High Efficiency Switching Mode Power Supply
AC Power Options AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator LED
Rigging / Bracket / 10 M8 threaded inserts including 4
Mounting Options M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector Switchable LOOP / MIX Balanced Male XLR
Input A - type Switchable balanced mic or line level input
Input Sensitivity Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu
Input Connector XLR - 1/ 4" Combo jack
Input Impedance Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type Line level input
Input Sensitivity XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level +22dBu
Input Connectors Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
("BRO"™) circuit +5dB at 60Hz
Subsonic Filter 30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D) Rated 350W RMS, 700W Peak
High- Frequency (Class D) Rated 70W RMS, 140W Peak
Electronic Crossover 24dB/octave Linkwitz-Riley
Crossover Frequency 1.8kHz
Controls High (±10dB) 10kHz Shelving
Equalization Low (±10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs ) 23.7kg / 52.67lbs
Gross weight ( kg / lbs ) 26.94kg / 59.27lbs
  • 2-way, active bi-amplified speaker system
  • Custom 15", Low Frequency driver and Titanium High Frequency compression driver provide exceptional clarity, high power handling capability and maximum efficiency
  • State-of-the-art, high efficiency switch mode power supply with a class D low frequency power amplifier and a class A/B or class D high frequency amplifier
  • Low frequency power (Class D) 350W RMS, 700W PEAK
  • High frequency power (Class A/B) 70W RMS, 140W PEAK
  • Active signal limiting system with LED indicator on rear panel
  • Built in 2 channel mixer with microphone and line level inputs Balanced XLR line output for connections to subwoofers or daisy chaining units together
  • Switchable Bass Response Optimizer (BRO™) circuit
  • Low distortion, high power handling, water resistant woofer
  • Professional high frequency compression driver with titanium diaphragm
  • XLR and TRS line inputs via convenient 'combo' jacks
  • Two band master EQ controls
  • Full Protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters